Our Work

Projects

Sort by sector

New Albion Station

Project Overview

The Queensland Department of Transport and Main Roads is rebuilding Albion Station in Brisbane's inner north as a rail-to-rail interchange, ahead of Cross River Rail services. The new station will have four wider, raised platforms, an elevated southern concourse, a northern pedestrian overbridge, and a modern station building with lifts, accessible facilities and improved passenger amenities.
More Info

Henderson Road and Raglan Street Cycleway – Lighting Audit and ASP3 Design

Project Overview

This is a project from City of Sydney to extend the cycleway connection along Henderson Road and Raglan Street between the existing cycleway at the intersection of Davy/Mitchell Road and the existing cycleway at George Street. The project aims to improve the safety, function, cyclist prioritisation and separation from traffic and pedestrians.
More Info

Utilities Strategy & Design

Project Overview

More Info

The Wave Stage 2

Project Overview

The Wave Stage 2 forms part of the Queensland Governments broader Sunshine Coast public transport program. The Wave Stage 2 is approximately 7km of dual-track rail extension which includes Aroona and Birtinya stations, Birtinya stabling facilities, a tunnel through Little Mountain, elevated rail structures and road interfaces.
More Info

HBD & Australia Avenue Upgrade

Project Overview

The Homebush Bay Drive and Australia Avenue (HBDAA) Intersection Upgrade is a Transport for NSW project at Sydney Olympic Park, upgrading the intersection, ramps and approaches along Australia Avenue and Underwood Road. BMD Constructions engaged Croí during the Early Contractor Involvement (ECI) phase to provide utilities design and management services for their tender.
More Info

Canberra Aquatic Centre

Project Overview

Infrastructure Canberra is delivering the new Canberra Aquatic Centre (CAC) in Commonwealth Park, a 50-metre indoor aquatic facility for the ACT community. Croí was engaged as Utilities Advisor for the Approvals and Design phase, leading the utilities strategy, scope definition and stakeholder engagement to support NCA and EPBC approvals.
More Info

Henry Lawson Drive Stage 1B

Project Overview

Henry Lawson Drive Stage 1B is a Transport for NSW project for the upgrade of approximately 1.8 km of Henry Lawson Drive, extending from the M5 Motorway at the southern end to Auld Avenue at the northern end, located within Milperra in the city of Canterbury-Bankstown LGA. Laing O'Rourke engaged Croí during the Early Contractor Involvement (ECI) phase to provide utilities management services for their tender.
More Info

Bandon Road Upgrade and Extension S3&4

Project Overview

The Bandon Road Corridor Upgrade and Extension Sections 3 & 4 project is a design-and-construct package managed by Transport for NSW from Riverstone West Spine Road to Windsor Road, part of the North West Growth Centre. Key features include an upgraded rail crossing north of Vineyard Train Station, 4 lane carriageway, new connector roads and off-road shared path for pedestrians and cyclists.
More Info

Elizabeth Drive & Mamre Road Upgrade

Project Overview

Transport for NSW is upgrading two key corridors supporting the Western Sydney International Airport and Aerotropolis: 14 km of Elizabeth Drive (The Northern Road to the M7) and 6.1 km of Mamre Road (Erskine Park Road to Kerrs Road), each to a four-lane divided carriageway with provision for six lanes. Croí is delivering utility detailed design and stakeholder management for Gamuda across both roads, with a separate design for each.
More Info

Epping Bridge Project

Project Overview

The Epping Bridge Project is a TfNSW project replacing the 124-year-old Epping Road bridge over the Northern Railway line with a new, wider bridge. The project contains complex staged utility relocations across the bridge and Blaxland Road. Laing O’Rourke (LOR) engaged Croí during the Early Contractor Involvement (ECI) phase to provide utilities management and concept design services for their tender.
More Info

Botany Industrial Park

Project Overview

The Botany Industrial Park covers approximately 60 hectares of land and has historically been used as a manufacturing plant. It is recognised as the third largest chemical manufacturing site across all of Australia. Most manufacturing operations ceased in 2024, and the available lots of land are now looking to be developed into serviceable buildings.
More Info

Wyong Town Centre Upgrade

Project Overview

The Pacific Highway Upgrade through Wyong Town Centre is a TfNSW project, widening the highway through the town centre with new intersections, bridges and pedestrian and cycle paths. The project contains complex utility relocations and staging. Daracon Georgiou Joint Venture (DGJV) engaged Croí during the Early Contractor Involvement (ECI) phase to provide utilities management and concept design services for their tender.
More Info

Ryde Hospital – ASP3 Designs

Project Overview

Croí was engaged by A.W. Edwards, head contractor for Health Infrastructure's Ryde Hospital Redevelopment for ASP3 design works. The redevelopment includes the design and construction of new hospital buildings and the refurbishment of existing hospital spaces. This included the relocation of an Ausgrid 66kV sub-transmission pole on Denistone Road.
More Info

Parramatta Integrated Station Development

Project Overview

Part of Sydney Metro West, Parramatta integrates a new underground station with over and adjacent station development (OSD/ASD) and public domain works. Croí supported the Gamuda-led consortium at tender and is now delivering utility design and approvals for the station and OSD/ASD connections.
More Info

Four-Mile Creek Stage 1

Project Overview

Four Mile Creek Stage 1 is a 570-hectare staged industrial development with large-format warehousing, rail manufacturing and maintenance facilities, an intermodal terminal and a northern gateway commercial precinct. Early works are planned to start in late 2029. Croí prepared the Utility Risk and Opportunities Report covering electrical, water, wastewater and telecommunications servicing.
More Info

Essential Energy EV Charging

Project Overview

Essential Energy is actively driving the expansion of electric vehicle (EV) charging infrastructure across regional New South Wales through a series of innovative trials and strategic collaborations. The electricity distributor is focusing on leveraging existing network assets to provide cost-effective and accessible charging solutions, supporting the NSW Government's EV Strategy.
More Info

SYD12 – HV Supply

Project Overview

Croí was engaged by Digital Realty to deliver the Ausgrid ASP3 design for the Stage 1 load connection (approx. 20 MW) of the new 72.5 MW SYD12 data centre at 23 Waterloo Road, Macquarie Park. The design provides twin 11 kV feeders from Top Ryde and Lane Cove zone substations (approx. 6 km each), enabling staged supply ahead of Ausgrid’s planned Wallumatta STS.
More Info

Ryde-Pymble Trunkmain No.3 (RP03)

Project Overview

The RP03 project involves the replacement of over 10 kilometres of DN900 water main from Ryde Pump Station to Wahroonga Reservoir in Sydney's northern suburbs, traversing heavily congested urban environments with thousands of existing utility interfaces.
More Info

Loganlea Station Relocation

Project Overview

Part of the $5.75B Logan and Gold Coast Faster Rail program, the project relocates Loganlea station 500 m south to a new site opposite Logan Hospital. Delivered by the Martinus Degnan Joint Venture (MDJV) for TMR, it includes a new station building and platforms, a pedestrian overpass with lifts, and bus and park ’n’ ride facilities, with the existing station kept open throughout. Croí was engaged by MDJV to manage Public Utility Plant (PUP) for the Station and Civils Package.
More Info

Southwest Metro Errant and Hostile Vehicle Works (CIRA)

Project Overview

The Errant and Hostile Vehicle Mitigation project part of the Southwest Metro project will see the design and installation of treatment strategies on 15 bridges and 66 locations along the converted Sydenham-to-Bankstown Metro line. These protective measures ensure driverless Sydney Metro services are safe for passengers and that the 130-year-old corridor meets modern safety standards
More Info

Digital Realty

Project Overview

Digital Realty operates more than 300 data centres across over 25 countries, providing secure, high-capacity infrastructure for storing and running IT workloads. One of these facilities, SYD11, is located in Erskine Park, NSW, and offers over 3,300 m² of customer space. As part of a capacity expansion at the site, both SYD11 and the nearby SYD14 required an upgrade in electrical load capacity. This increase necessitated the installation of additional feeders, supplied by the local energy provider, Endeavour Energy.
More Info

Sydney Metro – WTP

Project Overview

The Western Tunnelling Package (WTP) is a major component of the Sydney Metro expansion, delivering around nine kilometres of twin tunnels between Westmead and Sydney Olympic Park, plus two spur tunnels. Scope includes station box excavations at Westmead and Parramatta, mined tunnels and caverns, tunnel portals at Clyde Stabling and Maintenance Facility, shaft construction, crossover structures, ventilation and egress facilities, utilities works, road modifications, and the establishment of a precast facility at Eastern Creek.
More Info

Sydney Desalination Plant Network Expansion

Project Overview

The Sydney Desalination Plant Network Expansion (SDPNE) project seeks to enhance water resilience, mitigate risks, and augment capacity. Positioned as the inaugural project under the Reliable Water Supply program, SDPNE involves network augmentation required to transfer an increase of 250 ML/d output from the Sydney Desalination Plant into the wider potable water network.
More Info

SYD14 Data Centre – ASP3 HV Design

Project Overview

Croí was engaged by Digital Realty to design the HV supply upgrade for its SYD14 Data Centre at 16 Lockwood Road, Erskine Park. Croí worked with Endeavour Energy to define the connection methodology and delivered a certified Level 3 (ASP3) design for a new twin-cabled feeder (MM1212 Digital Realty No. 6 to SS-55394), then was retained to support through construction of the ASP Level 1 works.
More Info

SYD11 Data Centre – ASP3 HV Designs

Project Overview

Croí was engaged by Digital Realty to deliver the HV utility upgrade for its SYD11 Data Centre at Templar Road, Erskine Park. Croí completed the Endeavour Energy twin-feeder design as a certified Level 3 (ASP3) design, then was retained to support Area 3 through construction of the ASP Level 1 works.
More Info

River Torrens to Darlington (T2D)

Project Overview

The T2D Project is the final 10.5km section of Adelaide’s North-South Corridor, and will complete 78km of non-stop, traffic light-free motorway between Gawler and Old Noarlunga. When complete, more than 50% of the T2D Project will be tunnels.
More Info

Parramatta Light Rail – Stage 1

Project Overview

The Parramatta Light Rail Stage 1 project involved extensive utilities management across a 12 km corridor in a densely serviced urban environment. The route intersected major water, gas, electrical, and telecommunication assets, requiring detailed service investigations, stakeholder engagement, and complex coordination. Utilities relocation and protection strategies were developed in collaboration with asset owners to minimise service disruptions and ensure construction feasibility.
More Info

Sydney Metro West

Project Overview

The Sydney Metro West Project (SMW) consists of 24 kilometres of underground rail and the development of 7 new stations between Westmead and the Sydney CBD, with a Maintenance and Stabling Facility at Clyde. Sydney Metro West will double the rail capacity between Parramatta and the Sydney CBD.
More Info

Sydney Metro – City & Southwest

Project Overview

A 30 kilometre extension of metro rail from the end of Sydney Metro Northwest at Chatswood under Sydney Harbour, through new CBD stations and south west to Bankstown. The City portion from Chatswood to Sydenham opened in 2024 with seven new metro stations. The remaining Southwest portion featuring 11 upgraded stations is due to open in 2026.
More Info

Canberra Light Rail – Stages 1, 2A and 2B

Project Overview

The Canberra Light Rail Stages 1, 2A & 2B projects have a combined project value of $1.3Bn. Canberra Light Rail Stage 1 is from Gungahlin to City which is 12 kilometres and 13 stations. Canberra Light Rail Stage 2A is from City to Commonwealth Ave which is 1.7 kilometres and 3 stations and Early Works package – Raising London Circuit. Canberra Light Rail Stage 2B is from Commonwealth Avenue to Woden.
More Info